NEWS CENTER

During the operation of a horizontal multi-stage pump, abnormal heating is prone to occur, which also causes unstable operation, reduces the life of the pump and even causes the pump to be damaged. Next, I will explain how to prevent the horizontal multi-stage pump from overheating. Hot phenomenon.
How to prevent the horizontal multi-stage pump from getting hot:
1. Clean and maintain the water pump regularly
When cleaning, be sure to disconnect the power supply first to avoid safety accidents and malfunctions caused by accidental operations. When cleaning the water pump casing, you can use appropriate cleaning agents such as pure water or alcohol, and use special tools to easily clean and protect the surface of the water pump casing. not be harmed.
2. Install energy-saving water pumps
The energy-saving water pump adopts patented intelligent control, which can monitor the working status of the water pump in real time, identify long-term shutdowns and short-term shutdowns, reduce the operating current and speed of the pump, and reduce the increase in water temperature.
3. Install intelligent temperature control system
If the water pump has begun to become hot, you can choose an appropriate temperature control technology to deal with it, such as installing an intelligent temperature control system to control the temperature of the water pump promptly and accurately.
4. Choose appropriate wires
Choose the appropriate cable according to the power of the water pump. The cross-sectional area of the wire should meet the power requirements of the water pump. Do not use poor quality wires.
5. Reduce friction resistance
When the water pump is running, try to reduce frictional resistance and avoid collisions and jamming during the operation of the machine. This will cause the machine to run poorly, and long-term use will also affect the life of the equipment.
6. Ensure fast heat dissipation
It is necessary to ensure that when the water pump is working normally, the air circulation around the fan is smooth. This can maintain the heat dissipation effect when the water pump is running, get rid of heat in a timely and effective manner and ensure the normal operation of the machine.